PARKER D1VW020DNJWL

Parker,
Directional Control Valve (8 Watt)
- Series D1VW
Part #: D1VW020DNJWL

Parker, Directional Control Valve (8 Watt) - Series D1VW

Part #: D1VW020DNJWL

Technical Specifications

Seal Material:	NBR
Configuration:	na
Spool Code:	020
Electrical Part Option:	M12 pin assignment, pins 1 and 2 not connected
Solenoid Connection:	Connector as per EN 175301-803
Function:	Directional Control
Spool Position:	2 positions, detent, operated in position a or b, no center position, no offset position
Product Series:	Directional control valve
Actuation Type:	Solenoid
Port Connection:	NG06 / CETOP 03
Mounting Type:	Subplate mounting
Mounting Position:	Unrestricted, preferably horizontal
Operation Type:	Direct
Configuration:	D - Double solenoid, 2 position, detent
Input Voltage:	24 VDC
Power Consumption:	8 W
Function:	2-way
Coil Type:	DIN w/o Plug
Maximum Operating Pressure:	350 bar
Maximum Flow Rate:	60 L/min
Electrical Part Option:	N/A
Maximum Operating Temperature:	60 °C
Coil Specifications Met:	N/A
Minimum Operating Temperature:	-25 °C
For Fluid Type:	Hydraulic oil according to DIN 51524
Additional Options:	N/A
Seal Material:	NBR
Weight:	1.5 kg

Item Information

The directional control valve series D1VW 8 Watt in NG06 (CETOP 03 / NFPA D03) enables direct connections to a programmable logic controller (PLC) or a bus knot and thus saves the use of a relay. This on/off valve provides high functional limits up to 60 l/min in combination with a very low, energy-saving pressure drop due to optimized flow passages. The maximum pressure is 350 bar.

Markets:
• Industrial

Features/Benefits:
• Compact, proven design that represents our long-term experience in hydraulics
• Low pressure drop – resulting in low energy losses in operation
• Wide range of spools - fits all hydraulic systems
• Shortest lead time - no warehousing necessary

Applications:
• Machine tools

D1VW 8 Watt valves are offered with standard solenoid connection (as per EN175301-803) and M12 x 1 connection. The version with M12 x 1 connection and LEDs is conform to the DESINA standard (DistributEd and Standardised INstAllation technology) for machine tools and manufacturing systems.